Sous Vide Regeneration Technic Blue
can be fitted to water baths, tanks and containers using accessory
Sous Vide Regeneration is a durable stainless steel construction,
painted surfaces are powder painted with tough anti-bacterial
finish with good chemical resistance. Easy to use controls that
wipe clean and have an anti-bacterial finish. Immersed components
are corrosion resistant. Quiet running in use and providing
excellent water temperature stability. Indication of heating, over
temperature alarm and timer running.
When a low liquid level is detected a “FiLL” message automatically
appears and heating is suspended. Once refilled, heating is
restored and temperature control resumes automatically. Over and
under temperature alarms automatically protect work in the water
bath, providing heater cut off, visual message and indicator.
Featuring bold LED display of measured temperatures in real-time,
increments of ±0.1°C, using precision PID temperature control.
Setting for water temperature only or combination of temperature
and time. Timer setting variable in 1-minute increments from 00:01
[hh:mm] to 99:59 [hh:mm] with “end” message on completion-timed
period. Settings retained even after turning the unit off.
Easy to use controls, utilising touch keypads for setting time and
temperature values with indicators for heating, over temperature
alarm and timer.
The water bath can be set to run at a set temperature or commence
the timer once the water reaches set temperature.
Features auto setting over and under temperature alarm protecting
your work at set temperature.
Every unit undergoes a factory calibration at two temperatures for
Features a low liquid level float switch, which ensures heating, is
switched off if the liquid falls below the recommended level -
display will show “FiLL”. Heating is switched off but stirring
continues. To reset carefully top up the liquid to the recommended
The under/over temperature alarm is automatically set 4˚C above and
4˚C below set temperature. When in alarm condition the indicator
illuminates and actual bath temperature is shown, if bath is over
temperature both heating and stirring are switched off. Once liquid
temperature has fallen or risen above/below the alarm setting the
indicator clears and actual bath temperature is shown.
For water temperatures below ambient we recommend a glycol/water
mix or accessory solution LB-5.0 Lab Bath, lid or spheres fitted to
retain the cold. For cooling an accessory DC1-300 Immersion Cooler
can be used. We recommend operating the water bath in an ambient
For water temperatures above 60°C we recommend accessory lid or
spheres fitted for optimal performance, reduce evaporation, assists
keeping work and water free from contamination, saves energy
reducing electricity consumption and running costs.
Power Consumption (220-240V/120V)